A* Pathfinding Project  3.8.1
The A* Pathfinding Project for Unity 3D
 All Classes Namespaces Files Functions Variables Typedefs Enumerations Properties Events Macros Groups Pages
Local Avoidance

How to use the local avoidance in the A* Pathfinding Project.

The local avoidance included in the A* Pathfinding Project is based on RVO: Reciprocal Velocity Obstacles. The implementation is sampling based and uses gradient decent to find the optimal velocity.

Note
The local avoidance system was previously disabled because of licensing issues. This is no longer the case as the whole system has been rewritten in a new way. The exposed APIs for the previous system and the new one are almost identical.
A* Pro Feature:
This is an A* Pathfinding Project Pro feature only. This function/class/variable might not exist in the Free version of the A* Pathfinding Project or the functionality might be limited
The Pro version can be bought here

Number Crunching

So how fast is this system then, you might wonder. It is very high performance. Especially if you take into account the fact that a local avoidance simulation does not need to run at a very high fps, that's just a waste of CPU cycles because the quality won't improve much. I have been able to simulate 5000 agents at a good fps on my computer (i7 processor). The local avoidance simulation ran at about 10 fps and the game ran at 50-100 fps mostly, with a lowest fps of around 30-40. The visualization for this simulation was done simply by creating a mesh which held one quad for each agent. The reason for this is that at such high numbers, creating a GameObject for every agent is really slow, just creating that many game objects took something like 10 seconds when I tested. The agents were setup in a circle and trying to reach their antipodal points. So it was basically as crowded as it can get.

However do not count on having this high number of agents in your game. These examples were very lightweight and in a game there is usually lots of overhead from many other things.

See below for a screenshot of the mentioned stress test:

Overview

For this reason, that Unity can be a limiting factor, the system is divided into two parts. First there is the core simulation code. It is completely independent of Unity specific objects such as GameObjects and MonoBehaviours. The only really Unity specific classes it uses is the Vector3 and Vector2 structs which are easily interchangeable. This core handles all simulation of rvo (local avoidance) agents.

The second part is the Unity interface. Many of those classes are just wrappers for the corresponding core classes. The RVOSimulator class is for example just a wrapper class for the Pathfinding.RVO.Simulator class. The Unity interface also contains helper classes for much easier local avoidance integration. One of those is the RVOController which you will probably use quite a lot. It is written to be an almost drop-in replacement for the Unity Character Controller, supporting functions such as Move and has properties such as velocity which you can easily access.

All of the scripts in the Unity interface part share common assumptions on how the scene should be set up: There should always be one (1) RVOSimulator in the scene, other scripts will look for it and get the core simulator instance it is a wrapper for. You can simply add it to any GameObject, edit the few settings if you want and it will work. You should never have more than one, all scripts which look for it use FindObjectOfType and there is no easy way to control exactly which of the multiple RVOSimulators it will return, so keep it to one for simplicity's sake.

Examples

There are two example scenes included which show how the local avoidance system works. You can find them in Assets/AstarPathfindingProject/ExampleScenes/Example11_RVO.

Integration

Ok, you now know sort of how it is structured, let's build a small concrete example so you can see how it works.
Start by creating a new scene, add a large plane as a ground (position (0,0,0), scale (10,10,10)). Then add a new GameObject, name it "Simulator". Now add the component RVOSimulator, you can find it in Components -> Local Avoidance -> RVO Simulator. You can see that it has a few options, but you can leave them at the default setting for now. However I recommend that you read the class documentation for the RVOSimulator later since the performance is very dependent on those few settings. This component will handle the simulation of our agents as well as storing any dynamic obstacles we add (more about those later).

Now we want an AI to walk around. It will be a very simple AI, it will basically walk forward. So first add a new Cylinder to the scene (GameObject -> Create Other -> Cylinder). It will create a cylinder with a height of 2 units somewhere in the scene, place it somewhere visible above the ground plane we added before. Add to this GameObject the component RVOController, you can find it at Components -> Local Avoidance -> RVO Controller. This component is designed to be an almost drop-in replacement for the Unity Character Controller, so if you have used the character controller, you will feel at home with this one. It does not, for obvious reasons support some collision specific things, like collision flags but it is very similar. Since our cylinder is 2 units high, set the height variable on the RVOController to 2.

Now press play! If everything goes well there is a very high probability that your cylinder goes flying into the air. That is expected and I will tell you how to avoid it. If you are not seeing this behavior from your cylinder it is the floating point math which has a nice day. Move the cylinder around a bit and you will probably see it.

So what is causing this? To be able to position the agent at the correct Y coordinate, and since colliders are not used, the RVOController uses raycasting. Basically it fires a ray from the center of the agent downwards and see where it hits, then it places the agent's feet at that point. The problem here is that the cylinder has a capsule collider attached, so the ray will hit the capsule and the script will position the agent a tiny distance upwards from it's previous position. The next frame, it will again find the capsule collider and position it a bit further up, and so it continues and creates the effect of the cylinder flying into the air. The solution is simple, either you remove the capsule collider from the agent which is the most straight forward thing to do since it will not be needed anymore, or if you really want to keep it, you can place the agent in another layer and edit the "mask" variable on the RVOController component. I will not go through all the settings of the RVOController component here, take a look at the class documentation for reference.

Now that we have our AI standing on the ground, we want to tell it to do something: so fire up your favorite text editor and create a script called SimpleRVOAI.cs. Here is what it should contain:

using UnityEngine;
using System.Collections;
using Pathfinding.RVO;
public class SimpleRVOAI : MonoBehaviour {
RVOController controller;
// Use this for initialization
void Start () {
controller = GetComponent<RVOController>();
}
// Update is called once per frame
void Update () {
controller.Move (transform.forward * 10);
}
}

It does't take an expert coder to see what that does. We simply get the RVOController at start and every frame we set the desired velocity to 10 meters per second in the forward direction, as simple as that. If you add this script to your cylinder and press play, it should move forward in a steady phase.

Note that the Move method takes a velocity (units/second) and not a movement delta (units/frame). This is a small difference compared to the CharacterController. The Move method is more similar to the CharacterController's SimpleMove method (but it would be odd for me to name it SimpleMove when I don't have a regular Move).

Now for the fun part. Duplicate the cylinder and place it some distance in front of the first one, then rotate it so that they are facing each other. Press play. The cylinders should move towards each other, and just before collision, avoid each other! Ain't that awesome!

The included AI scripts (AIPath, RichAI) support the RVOController out of the box, simply add the RVOController to a GameObject with an AIPath or RichAI component and make sure it has no other movement components (rigidbody or charactercontroller) and it will detect the RVOController.

Obstacles

Obstacles, dynamic and static can be added to the simulation. This first part will discuss navmeshes and the second part will discuss obstacles more generally.

Navmeshes

If you are using a navmesh based graph, it is very likely that you want your agents to not go outside, and perhaps even avoid the border of the graph. Fortunately for you, there is a simple script written just to do just that. It is called RVONavmesh and can be found at Components -> Local Avoidance -> RVO Navmesh. Add that to any GameObject in your scene and it will, when a graph is scanned or loaded add it's border as an RVO obstacle.

Note
The obstacle script only supports navmesh based graphs

Obstacles

Obstacles can be added to the simulation. The agents will not be able to pass through them (unless moving at very high speed relative to fps) and agents can also avoid them by both basic local avoidance but the RVOController can also apply force based avoidance from walls since it often looks better when AIs are not hugging the walls so to speak.

In very crowded situations, the agents will be able to penetrate the walls. This is because when it is really crowded, there might be a greater force causing the agents to separate then there is a force keeping them from penetrating the walls. This usually doesn't happen in real game scenarios however.

A few built-in colliders can be found in Components -> Local Avoidance. If you want to write custom colliders, take a look at the page for doing so (Writing RVO Colliders).

The build-in colliders can be moved around however you want and they will be updated appropriately. But just because they can be moved around it doesn't mean they can be used to push agents around. In fact, they are quite bad at it. As long as they move very slowly, it works, but if they move too fast, the agents can get stuck inside.

The one variable the colliders have in common is the Obstacle Mode field. The internal workings for it is explained in the Writing RVO Colliders tutorial, but it is pretty basic. KeepOut will block agents from moving into the obstacle, but not from moving out from it when they are inside, KeepIn will do the opposite.

See also the subpages for more in-depth information: